Split Arm Casement Window Operator ‘Maxim’ ‘Dyad’ 4-15/16” ARM (Truth Hardware 50.501.011) LEFT HAND
Split Arm Casement Window Operator ‘Maxim’ ‘Dyad’ 4-15/16” ARM (Truth Hardware 50.501.011) LEFT HAND
$48.50 – $65.50
The Maxim Series Operators have a high-pressure die-cast zinc housing that is electrostatically coated. The E-Gard coated gear arms and drive worm are made of hardened steel. The #50.501 Dyad Arm Operators are designed for windows 16″ to 32″ wide up to 72″ high with a maximum sash weight of 55 lbs. when used with the proper 14 Series Maxim Hinges. LEFT HAND SHOWN part number 31876 Also known as a TH-24082, TH-24083, TH-24182, or TH-24183. Order stud bracket and handle separately if needed (see related products below).
Please Note:
If you order this part in any color other than white, we will include a Cover & Folding Handle (Part #12614 – see related products tab below) in the matching color you ordered.
If you order this part in White, we will include a White Cover and a handle (Part #11454 – see related products tab below).
-
-
-39%
Snap Stud Bracket (Truth Hardware 12.51.11)Original price was: $15.50.$9.50Current price is: $9.50. View productSTAINLESS STEEL
-
-21%
Split Arm Casement Window Operator ‘Encore Dyad 4-15/16” ARM'(Truth Hardware 50.601.12) RIGHT HANDOriginal price was: $48.50.$38.50Current price is: $38.50. View product
-
DESCRIPTION: necessarily match handing of Operator – refer to table within application drawing page, or contact Truth’s Technical Service Department for further information.
Optional brackets for unique profile applications are available – see Truth’s Stud Bracket & Track section, or contact Truth Hardware for further details.
#11576.XX – Track & Slider, or #32384.92 – Low profile track
Optional Accessories:
#11329.XX Folding Handle
#41211.XX LH Nesting Cover
#41212.XX RH Nesting Cover
#31882 – Gasket
#31883 – Gasket Applicator
#23058.92 – Backplate (required for Rear Mount options
#21306 – Protective red plastic spline cap.
MAXIM® DYAD OPERATOR
Drawings begin on pg. 25l.
- Designed for narrow windows, but will operate a frame width from 16″ to 32″, and up to 72″ high and a sash weight of 55 lbs.
- Fits in all profiles currently using the EntryGard® or Encore® Dyad operators.
- Maxim Dyad provides over 7″ of washability with the standard Maxim® 13″ hinge and is compatible with Truth’s standard 10″ hinge, with reduced washability.
ORDERING INFORMATION:
- Specify “standard” or “coastal” package.
- Order item number: #50.50 or #50.51 (low profile) or #50.52 (rear-mount)
- Specify finish number.
- specify right- or left-hand (determined by the side the hinge is on when viewed from the outside).
- Select mounting hardware (sold separately).
#12510.XX – LH Bracket
#12511.XX – RH Bracket, or
#11661.XX – LH Bracket (low profile)
#11662.XX – RH Bracket (low profile)
NOTE: Handing of Brackets does not necessarily match handing of Operator – refer to table within application drawing page, or contact Truth’s Technical Service Department for further information.
Optional brackets for unique profile applications are available – see Truth’s Stud Bracket & Track section, or contact Truth Hardware for further details.
Optional Accessories:
#11329.XX Folding Handle
#41211.XX LH Nesting Cover
#41212.XX RH Nesting
#31882 – Gasket
#31883 – Gasket Applicator
#23058.92 – Backplate (required for Rear Mount options)
#21306 – Protective red plastic spline cap.
MAXIM® REVERSE DYAD OPERATOR
Drawings begin on pg. 25r.
- Uniquely designed for narrow windows and specialty windows like round tops, half round, trapezoid, garden, octagon and windows that require Butt Hinges.
- Will work on frame widths down to a minimum of 12″ depending upon the thickness of the frame.
- Uses a non-handed bracket which will help reduce inventory issues.
ORDERING INFORMATION:
- Specify “standard” or “coastal” package.
- Order item number:
#50.70 or
#50.71 (low profile) or
#50.72 (rear-mount)
- Specify finish number.
- specify right- or left-hand (determined by the side the hinge is on when viewed from the outside).
- Select mounting hardware (sold separately).
#11674.XX – Non-Handed Bracket
-
The easiest way to determine the handing of your casement window unit is from the INTERIOR (inside) of the home. If you have multiple windows, stand in front of each window in question and locate the locks. The lock location will determine the handing of the unit.
All casement hardware, which includes locks, operators and hinges, are handed based on the lock location when viewed from the interior.
Alternatively, handing can also be determined by the hinge side when viewed from the EXTERIOR.
Examine the product image carefully when ordering. You should be able to see the difference between the left and right-hand side version.
-
Color Aluminum, Coppertone, Clay, White, Beige, Black, Bronze
