Awning Window Operator (Truth Hardware 51.320.11)
Awning Window Operator (Truth Hardware 51.320.11)
$65.50 – $72.50
The Maxim Series Operators have a high-pressure die-cast zinc housing that is electrostatically coated. The E-Gard coated gear arms and drive worm are made of hardened steel. (51.00.32.011 or 51.00.78.521)
You can sometimes find the numbers 41013 and 41016 stamped on the underside of the long arms.
Order track, black maxim pivot slide shoe, handle separately if needed (see related products below).
Please Note:
If you order this part in any color other than white, we will include a Cover & Folding Handle (Part #12614 – see related products tab below) in the matching color you ordered.
If you order this part in White, we will include a White Cover and a handle (Part #11454 – see related products tab below).
-
#23058.92 – Backplate (required for Rear mount options)
#21306 – Protective red plastic spline cap.
MAXIM® SINGLE ARM OPERATOR
Drawings begin on pg. 25x.
- Created for casements which are 20″-32″ wide up to 72″ high and with a 73lb. sash weight.
- Fits in all profiles currently using the EntryGard® or Encore® Single Arm operators.
ORDERING INFORMATION:
- Specify “standard” or “coastal” package.
- Order item number:
#52.01 or
#52.03 (low profile)
NOTE: Rear-mount version available upon request.
- Specify finish number.
- Specify right- or left-hand (determined by the side the hinge is on when viewed from the outside).
- Select mounting hardware (sold separately).
#11576.XX – Track & Slider, or #30175 – Low profile track Optional Accessories:
#11329.XX Folding Handle
#41211.XX LH Nesting Cover
#41212.XX RH Nesting Cover
#31882 – Gasket
#31883 – Gasket Applicator
#21306 – Protective red plastic spline cap.
MAXIM® AWNING OPERATORS
Drawings begin on pg. 25ee
- Allows the manufacturer to offer the same look throughout the home on both casements and awnings.
- Will provide for maximum opening combined with wide “pull-in” connection to sash.
- Operates frame widths from 20″ to 60″, reducing inventory requirements for operator sizes.
- New narrow gauge version (#51.01) fits smaller cavity profiles and smaller window sizes.
- “Quick disconnect” feature on operator arms does not require tools.
ORDERING INFORMATION:
- Specify “standard” or “coastal” package.
- Order Operator item number:
#51.00 or
#51.02 (rear-mount) or
#51.01 (Narrow Awning Operator)
- Specify finish number.
- Select mounting hardware (sold separately).
#11577.XX – Track and Pivot Slides
Optional Accessories:
#11329.XX Folding Handle #41211.XX LH Nesting Cover #41212.XX RH Nesting Cover #31882 – Gasket
#31883 – Gasket Applicator
#23058.92 – Backplate (required for Rear mount options)
#21306 – Protective red plastic spline cap.
-
Color White, Beige, Black, Bronze, Aluminum, Coppertone, Clay